Mr.BMX

Assorted Parts To Clear Out #10 (Revised Prices)

11 posts in this topic

TUF NECK - Original Gold - Used Survivor


Overall great shape with small dings, colour fade and surface rust on bolts etc.

Use as-is, or restore it to showroom spec.


$200. FREE post Auswide, or Pickup in Doncaster East, Victoria.


Please login or register to see this image.

tufneckgold_02.jpg

tufneckgold_03.jpg

tufneckgold_04.jpg

tufneckgold_05.jpg

tufneckgold_06.jpg

tufneckgold_07.jpg






Tuf Neck 2000 headstem - Blue - Used.

Here's a unique Tuf NEck 2000 "3-bolt" round stem.

It's quite clean all over and deep blue (no fading).


However, the main quill-bolt has snapped just inside the stem, so it'll need to be worked out.

I'm throwing in a spare Master bolt (NOS), but also note it has an off-centre hole at the top.

Not that you really notice with the stem bolt fitted.


$100. FREE post Auswide, or Pickup in Doncaster East, Victoria.


tufneck2000_01.jpg

tufneck2000_02.jpg

tufneck2000_03.jpg

tufneck2000_04.jpg

tufneck2000_05.jpg






DIA-COMPE MX1000 REAR Calipers #1 - BLUE - Survivors.


Here's a classic Dia-Compe MX1000 REAR brake caliper - BLUE Survivor.


This is the real MX1000, stamped on the back DiaCompe japan, and has the correct quick-release lever and weinmann adjuster.

(replace the centre bolt to make it into a FRONT if needed).


$80. (or buy BOTH MX1000's for $200/pair) FREE post Auswide, or Pickup in Doncaster East, Victoria.


mx1000rear1_01.jpg

mx1000rear1_02.jpg

mx1000rear1_03.jpg






DIA-COMPE MX1000 REAR Calipers #2 - BLUE - Survivors.


Here's a 2nd pair of classic Dia-Compe MX1000 REAR brake caliper - BLUE Survivor.


This is the real MX1000, stamped on the back DiaCompe japan, and has the correct quick-release lever and weinmann adjuster.

(replace the centre bolt to make it into a FRONT if needed).


$80. (or buy BOTH MX1000's for $200/pair) FREE post Auswide, or Pickup in Doncaster East, Victoria.


mx1000rear2_01.jpg

mx1000rear2_02.jpg

mx1000rear2_03.jpg






SCOTT/MATHAUSER Brake-Pads Display Stand/dispenser - Ex shop stock.


Here's a classic "SCOTT/MATHAUSER Brake-Pads Display Stand/dispenser" as seen on most bikeshop counters in the 80's.


This sale is for the main backing display board AND the 4 Scott/Mathauser brake pads on display.


Simply undo the nuts on the rear side to remove the brake pads.....simples!


$70. FREE post Auswide, or Pickup in Doncaster East, Victoria.


matthpads_01.jpg

matthpads_02.jpg

matthpads_03.jpg

matthpads_04.jpg






HOTFOOT 24 velro padsets (Repro from UK)


Here's 2 sets of reproduction Repco "Hotfoot 24" padsets to suit the 24inch cruisers.


Choice of Gold text on black material, or White text on black material.



These are mint new and still in sealed bags from when they came from the UK pad dude.

I never opened them because i sold my Hotfoot 24's by the time the pads arrived.


pics tell the story


$80/set. - FREE post Auswide, or Pickup in Doncaster East, Victoria.


hotfoot24blackwhite_01.jpg

hotfoot24blackwhite_02.jpg

hotfoot24blackyellow_01.jpg

hotfoot24blackyellow_02.jpg






BMX car rego plate - decorative item


This is a novelty "actual-size" number plate for the BMX fan.

It's professionally made with the same reflective white backing as real rego plates, also includes the typical green border as used on Victorian plates back in the 'garden state' era.


Very clean and an ideal addition to the mancave/bmx museum.


pics tell the story


$60. FREE post Auswide, or Pickup in Doncaster East, Victoria.


bmxregoplate_01.jpg

bmxregoplate_02.jpg






RALEIGH Rampar 400 Forks - Original Black - Shop soiled/unused.


These were NEW from shop stock when i got them, but they now have rust coming thru the paint etc.

Never mounted on a bike, they were unsold stock with shelfwear, and nowadays worse for wear.


Fork thread is OK (tested) along the entire thread.


$50. FREE post Auswide, or Pickup in Doncaster East, Victoria.


rampar400_01.jpg

rampar400_02.jpg

rampar400_03.jpg

rampar400_04.jpg

rampar400_05.jpg







PLEASE NOTE:


All these cranks have been pulled form survivor bikes.

They have been closely checked and confirmed they're straight and ALL threads are working (not stripped).


- Pedal spindles have been screwed into LEft/Right sides 'all the way in' to confirm thread is 100% OK.


- BB/Spider-locknut (drive-side) has been screwed 'all the way in' to confirm thread is 100% OK.


- BB/cone-locknut (non drive-side) has been screwed 'all the way in' to confirm thread is 100% OK.


- ALL these cranks could do with a re-chrome for show purposes, or leave "as is" for vintage build/rider.



I don't sell broken untested crap!



....on with the show......






Crank #2 - TAKAGI CR-MO 170x28 - 1 piece cranks. - 28T BB thread


Here's a classic "TAKAGI CR-MO - 170x28" 1 piece crank - CHROME.


170mm length crank-arms.



NOTE:

This crank has the unique 28T bottom-bracket thread and requires a 28T BB set (Tange BB220-28, Mongoose, Schwinn etc)



$50. FREE post Auswide, or Pickup in Doncaster East, Victoria.


crank2_01.jpg

crank2_02.jpg






Crank #3 - TAKAGI CR-MO 170x24 - 1 piece cranks. - 24T BB thread


Here's a classic "TAKAGI CR-MO 170x24" 1 piece crank - BLACK.


170mm length crank-arms.


Black coating worn off crankarms as usual - Needs a re-black coating.



NOTE:

This crank has a 24T bottom-bracket thread and is suitable for most BBSets (Tange, YST, Tioga etc)



$50. FREE post Auswide, or Pickup in Doncaster East, Victoria.


crank3_01.jpg

crank3_02.jpg






Crank #5 - TAKAGI MX 170x24 - 1 piece cranks. - 24T BB thread


Here's a classic "TAKAGI MX 170x24" 1 piece crank - CHROME.


170mm length crank-arms.


The chrome on the rear of the arms is freckling a fair bit, could do with a re-chrome.



NOTE:

This crank has a 24T bottom-bracket thread and is suitable for most BBSets (Tange, YST, Tioga etc)



$50. FREE post Auswide, or Pickup in Doncaster East, Victoria.


crank5_01.jpg

crank5_02.jpg






Crank #6 - SUGINO Cr-Mo - 1 piece cranks. - 24T BB thread


Here's a classic "SUGINO Cr-Mo" 1 piece crank - CHROME.


175mm length crank-arms.



NOTE:

This crank has a 24T bottom-bracket thread and is suitable for most BBSets (Tange, YST, Tioga etc)



$50. FREE post Auswide, or Pickup in Doncaster East, Victoria.


crank6_01.jpg

crank6_02.jpg






Crank #8 - DK Cr-Mo - 1 piece cranks. - 24T BB thread


Here's a classic "DK Cr-Mo" 1 piece crank - CHROME.


175mm length crank-arms.


The chrome in some areas is freckling a bit, could do with a re-chrome.


NOTE:

This crank has a 24T bottom-bracket thread and is suitable for most BBSets (Tange, YST, Tioga etc)



$40. FREE post Auswide, or Pickup in Doncaster East, Victoria.


crank8_01.jpg

crank8_02.jpg






Crank #9 - LC 178 Cr-Mo - 1 piece cranks. - 24T BB thread


Here's a classic "LC 178 Cr-Mo" 1 piece crank - CHROME.


175mm length crank-arms.


The "Cr-Mo" is stamped on the drive-side arm. The non drive is either not stamped, or well worn.


NOTE:

This crank has a 24T bottom-bracket thread and is suitable for most BBSets (Tange, YST, Tioga etc)



$40. FREE post Auswide, or Pickup in Doncaster East, Victoria.


crank9_01.jpg

crank9_02.jpg








The end . . .

Share this post


Link to post
Share on other sites

Dia Compe rear calipers in blue - 80 bucks each or 200 for both???

Share this post


Link to post
Share on other sites

Dia Compe rear calipers in blue - 80 bucks each or 200 for both???

ooops, i only half-edited the previous pricing. (they were $120ea, 200/pair)

Now $80each, or $140/pair

Share this post


Link to post
Share on other sites

ooops, i only half-edited the previous pricing. (they were $120ea, 200/pair)

Now $80each, or $140/pair

Haha.....good price - now!

Share this post


Link to post
Share on other sites

Dibs crank #2 28TBB

And paid

Share this post


Link to post
Share on other sites

Dibs white text on black pads $80

Share this post


Link to post
Share on other sites

Dibs both Mx 1000 calipers $140 posted .. thanx Please login or register to see this image. /emoticons/default_smile.png" alt=":)" srcset="http://www.ozbmx.com.au/uploads/emoticons/smile@2x.png 2x" width="20" height="20">

Share this post


Link to post
Share on other sites

Dibs Tuf neck 2000 & Scott Mathauser brake pads as per pm.. thanx Please login or register to see this image. /emoticons/default_smile.png" alt=":)" srcset="http://www.ozbmx.com.au/uploads/emoticons/smile@2x.png 2x" width="20" height="20">

Share this post


Link to post
Share on other sites

Dibs crank #6 sugino crank

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.